How to operate, maintain, clean Gold Centrifugal Concentrator
2022-02-19
staurk machinery
Gold Centrifuge concentrator is a new trend gravity separation equipment, which combines the advantages of other gravity separation equipment.Lack of people know how to operae it, as one of China Gold Centrifuge concentrator supplier, will teach you, as below.
operation of the machine.
operation of the machine.
1. Preparation and inspection before start-up
(1) Prepare and inspect the motor according to the requirements of the motor.
(2) Check whether the equipment is stable.
(3) Check the tightness of the V-belt.
(4) Check the moving parts of the equipment for interference.
(5) Check whether the concentrate discharge port is closed.
2. Start the machine
After checking as above, turn on the power and start the motor.
Rotate in the direction of the arrow on the surface of the machine, and the direction is strictly prohibited.
3. Feed Water and feed the ore
After the equipment is running normally
Open the backflush valve, feed water
Then feed the ore, and feed the ore slurry configured according to the required liquid-solid ratio.
4. Precautions during equipment work
(1) Motor, monitor its temperature and current status.
(2) Pay attention to observe the condition of moving parts everywhere, whether there is any abnormality.
(3) Pay attention to the slurry-solid ratio at any time and adjust it in time.
(4) At certain intervals, open the peephole of the upper cover to check whether there is any abnormality.
5. Equipment shutdown
The equipment works normally, and the concentrate is cleaned once per shift. The cleaning time depends on the actual situation.
Short: 30 minutes
Length: 3 hours.
The above mining time is for reference only.
6. Abnormal shutdown of equipment
In special circumstances, it is necessary to temporarily shut down.
Stop feeding mine first
Stop backflushing
Last stop.
If it needs to be shut down for a long time, it is necessary to clean the concentrate and then check and maintain it.
Before starting the machine after shutdown, be sure to give backflush water first, and then give the slurry to avoid the loss of gold particles.